Home|About Us |News|Customer Service |Contact Us|Links|Your Cart


Search

  

Manufacturers


Our products

Air & Oil Filters

Bar End Mirrors & Signals

Batteries and Battery Care

Body Armour, Gloves & Undergarments

Bolts & Fasteners

Books & DVD's

Brake & Clutch Levers

Brake Lines

Brake Rotors and Pads

Brake & Clutch Master Cylinders

Camera's

Chain / Sprockets/ Accessories

CLEARANCE Products

Ducati Parts

Electronics, Quick Shifters and Controllers

Engine Components

Engine Covers

Exhausts

Fender Eliminators

Gas,Oil Filler and Tire Caps

Gift Cards

Handlebars & Clip Ons

Helmets, Boots & Clothing

Kawasaki Racing Kit Parts

Laptimers

Lighting

Locks, Alarms, Chains, Straps, Safety Wire

Luggage, Bags and Accessories

Motorcycle Covers

Motul Oils

NGK Plugs

R G Crash Protection

Race Bodywork & Fairing Brackets

Radiator and Oil Cooler Guards

Rearsets & Pedals

Sliders, Bar & Fork Protectors, Spools

Slipper Clutches

Stands and Trailer Restraints

Steering Dampers

Stomp Grip, Techspec, Paint and Tank Protectors

Suspension

Taillights

Tires and Accessories

Tools

Turn Signals

Twistgrip & Throttles

Windscreens

Tank Grips

Wheels





Newsletter Signup

Subscribe to our Newsletter to be informed of our new products and promotions!
  
Home » Our products » Exhausts » Two Brothers Racing » MX and Dual » Yamaha

Yamaha




 Power Tip DB Killers & Spark Arrestors
Manufacturer:

The P4 PowerTip™ was developed to fill the gap between the P1 and P3 sound reducing tips. The P4 is less restrictive than our P3 but quieter than the P1, reducing sound output between 3-5 dB on most pipes. Power loss is minimal. Not recommended for use with a spark arrestor screen.

Like all of our other sound suppressors, the P4 is very easy to install - simply unbolt your existing M-7 endcap, drop in the P4 and reassemble.
Note: The P4 is only intended for use with our M series outlets.
The P3 is designed to be used with the supplied spark arrestor screens in our Stainless/Aluminum ATV & MX exhaust systems. A straight-through sound diffuser, the TBR P3 PowerTip™ quiets most pipes between 6-8 dB with only a minimal loss of horsepower. An easy and cost effective method of helping to keep your vehicle in compliance with new noise regulations. Easy to install - simply unbolt your existing M series endcap, drop in the P3 and reassemble.

Note: Due to potential heat build-up, the P3 is not intended for use with our Titanium or Carbon Fiber ATV & MX muffler canisters or the Rhino 660 exhaust system.
Our P1 PowerTip™ sound suppressor is a recommended accessory for our exhaust systems with M series endcaps. A straight-through sound diffuser, the TBR PowerTip™ quiets the pipe to about 2-3 dB with no significant reduction in horsepower. Not recommended for use with a spark arrestor screen.

Easy to install - simply unbolt your existing M series endcap, drop in the P1 and reassemble.
Note: The P1 is only intended for use with our M series outlets.

U.S. Forestry Service approved Spark Arrestors are included with all M-7 V.A.L.E.™ off-road slip-on exhaust systems with aluminum canisters. These tips mute the exhaust tone slightly with absolutely no loss of horsepower. Additionally these tips prevent the introduction of foreign matter into the exhaust system. This spark arrestor DOES NOT fit, nor is it intended to be used with the C2, C4 or C5 mufflers.


Quantity : 
 
Type :

USD $32.95

CAD $32.95


Home|Contact Us|Your Cart
About Us|News|Customer Service|Links
Contact Us: By email: bsrtech@xplornet.com.
By phone: 519 475 9055.

© Blue Streak Racing. All rights reserved.