Home|About Us |News|Customer Service |Contact Us|Links|Your Cart


Search

  

Manufacturers


Our products

Air & Oil Filters

Bar End Mirrors & Signals

Batteries and Battery Care

Body Armour, Gloves & Undergarments

Bolts & Fasteners

Books & DVD's

Brake & Clutch Levers

Brake Lines

Brake Rotors and Pads

Brake & Clutch Master Cylinders

Camera's

Chain / Sprockets/ Accessories

CLEARANCE Products

Ducati Parts

Electronics, Quick Shifters and Controllers

Engine Components

Engine Covers

Exhausts

Fender Eliminators

Gas,Oil Filler and Tire Caps

Gift Cards

Handlebars & Clip Ons

Helmets, Boots & Clothing

Kawasaki Racing Kit Parts

Laptimers

Lighting

Locks, Alarms, Chains, Straps, Safety Wire

Luggage, Bags and Accessories

Motorcycle Covers

Motul Oils

NGK Plugs

R G Crash Protection

Race Bodywork & Fairing Brackets

Radiator and Oil Cooler Guards

Rearsets & Pedals

Sliders, Bar & Fork Protectors, Spools

Slipper Clutches

Stands and Trailer Restraints

Steering Dampers

Stomp Grip, Techspec, Paint and Tank Protectors

Suspension

Taillights

Tires and Accessories

Tools

Turn Signals

Twistgrip & Throttles

Windscreens

Tank Grips

Wheels





Newsletter Signup

Subscribe to our Newsletter to be informed of our new products and promotions!
  
Home » Our products » Sliders, Bar & Fork Protectors, Spools » Woodcraft Frame Sliders » Ducati

Ducati




 Ducati 848/1098/1198 Underbody Frame Slider Kit
Manufacturer: Woodcraft CFM

The frame slider kit for the 848/1098 spent a lot of time in R&D. The narrow engine makes for a somewhat long slider needed to reach the bodywork. We were concerned that a standard slider would have a tendendcy to bend and/or break - causing damage to the frame and engine.

With this in mind, we made a support bracket that clamps securely to the frame to reinforce the slider. Again we had a test rider try them out (with a crash while racing) and they held up perfectly, helping to protect the tank and water pump. These are a little more expensive than our standard sliders, but well worth the investment when it comes to protecting your Italian beauty.

This is a special set that sits behind the bodywork - offering valuable protection for the water pump & other vulnerable pieces, but which does not require cutting the bodywork. This kit utilizes our 50-1399 shorty pucks for replacement pucks.

NOTES: This kit requires the elimination and/or removal of the exhaust flapper valve motor. We confirmed with Ducati NA that this is just a low rpm noise reduction device. On our bike (which just has slipons) we trimmed off the small drain plug on the bottom of the piece and zip tied the valve motor to the frame about 1/4" above the original mount. All full exhaust systems we are aware of eliminate this device completely anyway, so if you have a full system none of this will apply to you.

Price includes PUCKS

Quantity : 

USD $209.95

CAD $209.95


Home|Contact Us|Your Cart
About Us|News|Customer Service|Links
Contact Us: By email: bsrtech@xplornet.com.
By phone: 519 475 9055.

© Blue Streak Racing. All rights reserved.